Heatless (heat) Regeneration Compressed Air Dryer (TKW(R)-20)

• Customization: Available
• Heating Mode: Dielectric
• Material Status: Bulk
• Model NO.: TKW(R)-20
• Atomization: Pressure Atomization
• Flow: Cross Flow
• Heat Source: Electricity
• Type: Airflow Spray
• Product: Heatless (Heat ) Regeneration Adsorption Type Air
• Function: Air Dryer
• Regeneration Method: Heatless or Little Heat
• Exhause Pressure: 0.6-1.0 MPa
• P.D.P.: - 20 Degree/-40 Degree
• Air Inlet Temperature: Under45 Degree
• Voltage: 220-380V/50Hz-60Hz
• Desiccant: Aluminagel or Molecular Sieve
• Oil Content: Under 0.01ppm
• Control Type: PLC
• Transport Package: Export Standard Wooden Case, or as Customer Demand
• Specification: 1650*650*2370mm
• Trademark: GREAT
• Origin: China
• HS Code: 8419399090
• Production Capacity: 100sets/Month

Product Description

Heatless (heat ) regeneration compressed air dryer (TKW(R)-20)

Heatless (heat ) regeneration adsorption type air dryer :
1.Adopt desiccant's capillarity adsorption to absorb the moisture in the air, the equipment is designed twin tower type, one tower is adsorbing when the other tower is regenerating under low pressure air condition.
2.Air intake temperature under 45ºC.
3.Operating controlling method PLC or microcomputer.
4.Installation method: stand flat ground foot installation method.

Heatless (heat ) regeneration adsorption type air dryer:
1.Besides the basic principle of the heatless type above, add heating process function and device.
In order to achieve to desiccant dehumidification effect, the regenerating low pressure air will be heat before flow into the regenerating tower, and then blow to cool.
Can save more energy than heatless type, improve the equipment's reliability and using life, and  the finished air dryness is better than heatless type dryer's.
2.Air intake temperature under 45ºC.
3. Operating controlling method PLC OR microcomputer.
4.Installation method: stand flat ground foot installation method.

Technical parameter of Heatless (heat ) regeneration adsorption type air dryer :
table 1:

Model	TKW(R)-1	TKW(R)-2	TKW(R)-3	TKW(R)-6		TKW(R)-8	TKW(R) -10		TKW(R) -15	TKW(R) -20
rated air flow capacity (Nm^3/min)	1.2	2.4	3.8	6.5		8.5	13.5		17	23
working pressure	0.6-1.0 (Mpa)
air inlet oil content	<=0.01(ppm)
desiccant	aluminagel or molecular sieve
regeneration method	heatless regeneration ( little heat regeneration)
working method	two tower alternating continuous working
regeneration air consumption	12%-15% (6%-8%)
heater power (kw/v)	0.5/220	1/220	1.2/220		2.1/220	3/220		4/220	5/380	6/380
final air dryness(P.D.P)	pressure dew point -20 ºC ( -40 ºC )
particle size of dust in final air	<=0.01 um
L*W*H (MM)	800*350* 1520	800*350* 1720	1000*450* 1660	1350*550* 1950		1350*550* 2150		1400*600*2120	1400*600* 2350	1650*650* 2370
air inlet/ outlet  pipe size	G1	G1	G1 1/2	G1 1/2		G2		G2	DN65	DN80
weight (kg)	110/125	140/155	150/180	340/390		400/450		450/520	710/770	900/980

 

table 2:

Model

TKW(R) -30

TKW(R)- 40

TKW(R)- 50

TKW(R)- 60

TKW(R) -80

TKW(R)- 100

TKW(R) -150

TKW(R) -300

rated air flow capacity (Nm^3/min)

35

45

55

65

85

100

160

300

working pressure

0.6-1.0 (Mpa)

air inlet oil content

<=0.01(ppm)

desiccant

aluminagel or molecular sieve

regeneration method

heatless regeneration ( little heat regeneration)

working method

two tower alternating continuous working

regeneration air consumption

12%-15% (6%-8%)

heater power  (kw/v)

10/380

12/380

15/380

18/380

27/380

36/380

54/380

90/380

final air dryness(P.D.P)

pressure dew point -20 ºC ( -40 ºC )

particle size of dust in final air

<=0.01 um

L*W*H (MM)

1700*750*2660

1800*750* 2850

1900*750*2860

2300*850* 3050

2800*1000*3050

2800*1100*3100

3020*1400*3315

4300*2400* 4100

air inlet/ outlet  pipe size

DN100

DN125

DN150

DN200

DN250

weight (kg)

1350/1430

1600/1680

1850/1970

2300/2450

2750/2900

4000/4180

6100/6260

12500/12780

Note : TKW stand for heatless regeneration adsorption type, TKR stand for little heat regeneration adsorption type.

Our factory and workshop:

After sales service:
1. Providing professional air compression program designing for free.
2. Providing our factory original machine parts at lowest price after machine sales.
3. Providing training and guidance for free, customers can send their staff to our factory to learn how to operate the machines.
4. Warranty period: the screw main machine is one year, the bearing is one year, the wear parts of air intake valve, electric components, electromagnetic valve, rate valve are 6 months
5. The air filter, oil filter, oil-water separator, lubricating oil, rubber parts and etc. are not included in warranty range.

Certification and patents of our air compressor


 

FAQ:
Q1: Are you factory or trade company?  
A1: We are factory.
Q2: Warranty terms of your machine? 
A2: One year warranty for the machine and technical support according to your needs.
Q3: Will you provide some spare parts of the machines? 
A3: Yes, of course.
Q4: How long will you take to arrange production? 
A4: 380V 50HZ we can delivery the goods within 20 days. Other electricity or other color we will delivery within 30 days.
Q5: Can you accept OEM orders? 
A5: Yes, with professional design team, OEM orders are highly welcome!